Currently, `MANUAL_STEPPER STOP_ON_ENDSTOP=1` type commands will move
until hitting the endstop, but it will still always consume the total
amount of move time. That is, following moves can't be started until
the total possible time of the homing move is completed.
Implement "drip moves" so that the code only schedules the movement in
small segments. This allows following movements to be scheduled
without a significant delay.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
`hall_filament_width_sensor` contains a runout sensor object internally.
This exposes those values in the API status result.
```
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","filament_detected","is_active","Diameter","Raw"]}}}
GOT: b'{"id":123,"result":{"eventtime":199567.823596603,"status":{"hall_filament_width_sensor":{"enabled":true,"filament_detected":true,"is_active":true,"Diameter":1.9499999999999986,"Raw":6113}}}}'
```
The duplication of `is_active` and `enabled` seems confusing, but both
of these can be independently manipulated by GCode:
```
SEND: {"id":123,"method":"gcode/script","params":{"script":"DISABLE_FILAMENT_WIDTH_SENSOR"}}
GOT: b'{"id":123,"result":{}}'
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","is_active"]}}}
GOT: b'{"id":123,"result":{"eventtime":199770.446013297,"status":{"hall_filament_width_sensor":{"enabled":true,"is_active":false}}}}'
SEND: {"id":123,"method":"gcode/script","params":{"script":"SET_FILAMENT_SENSOR SENSOR=hall_filament_width_sensor ENABLE=0"}}
GOT: b'{"id":123,"result":{}}'
SEND: {"id":123,"method":"objects/query","params":{"objects":{"hall_filament_width_sensor":["enabled","is_active"]}}}
GOT: b'{"id":123,"result":{"eventtime":199847.927726196,"status":{"hall_filament_width_sensor":{"enabled":false,"is_active":false}}}}'
```
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Commit 70838797 added support for clearing the homing state in
SET_KINEMATIC_POSITION commands. However, it can be difficult to use
that support as the default for SET_KINEMATIC_POSITION is to set all
axes as homed.
Add a new SET_HOMED parameter to allow one to explicitly request which
axes to consider in a homed state.
Also introduce a CLEAR_HOMED parameter and prefer that to the existing
CLEAR parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
A security vulnerability was found in Jinja 3.1.5 . The software is
not impacted by this vulnerability, but there is no harm in updating
to the fixed version.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
You can use the 40Mhz crystal oscillator recommended by TI official manual to get the best performance.
refer to: [ldc1612.pdf](https://www.ti.com/cn/lit/ds/symlink/ldc1612.pdf) 7.3.4
Signed-off-by: Xiaokui Zhao <xiaok@zxkxzk.cn>
* Add gram scale features to load_cell
* Convert sensor counts to grams and make this available via unix socket and object status
* Basic GCodes for tearing and reading the load cell
* Guided Calibration
* Diagnostic gcode to check the health of the load cell
* Update load_cell Documentation
* Add API server load_cell/dump_force endpoint
* Update [load_cell] config with calibration fields
* Add G-Code commands for working with load cells
* Add status reference for load_cell objects
Signed-off-by: Gareth Farrington <gareth@waves.ky>
It appears there was a security vulnerability in Jinja v3.1.4 . The
Klipper docs are not impacted by this vulnerability, but it's simple
enough to increment the version to avoid warnings.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Add support for a new get_canbus_status command to canserial.c .
Add new canbus_stats.py module that will periodically query canbus
mcus for connection status information.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Added a temperature sensor configuration for ADS1103, ADS1104, ADS1105, ADS1113, ADS1114 and ADS1115 chips that can be used to add Analog to Digital Conversion capability to machines that don't have that on their own. Like Raspberry Pi's or if more analog input pins are needed than the chip provides like for RP2040. Generally they can be used for any analog input, but the typical use case is for temperature measurement. This code also has been written with temperature measurement in mind and not as a general ADC.
Signed-off-by: Konstantin Koch <korsarnek@gmail.com>
Signed-off-by: Jack Wakefield <jackwakefield@protonmail.com>
`CLEAR` clears the homing status (resets the axis limits) without turning off
the motors. This is particularly useful when implementing safe Z homing in
`[homing_override]` on printers with multiple independent Z steppers (where
`FORCE_MOVE` can't be used).
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
This adds a new resonance test method that can help if a user has some mechanical problems with the printer.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Don't silently drop leading numbers and unusual characters at the
start of a command - for example, don't interpret '99M88' as 'M88'.
Don't silently drop spaces in a command - for example, don't interpret
"M 101" as the command "M101". Doing so will cause other parts of the
code (such as get_raw_command_parameters() ) to not work properly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
