docs: Update stm32h723 benchmarks now that it runs at 520Mhz

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2025-04-22 00:12:33 -04:00
parent 554ae78d8c
commit 4504c0333f
2 changed files with 8 additions and 8 deletions

View File

@ -250,22 +250,22 @@ results were obtained by running an STM32F407 binary on an STM32F446
### STM32H7 step rate benchmark ### STM32H7 step rate benchmark
The following configuration sequence is used on STM32H7: The following configuration sequence is used on STM32H723:
``` ```
allocate_oids count=3 allocate_oids count=3
config_stepper oid=0 step_pin=PA13 dir_pin=PB5 invert_step=-1 step_pulse_ticks=40 config_stepper oid=0 step_pin=PA13 dir_pin=PB5 invert_step=-1 step_pulse_ticks=52
config_stepper oid=1 step_pin=PB2 dir_pin=PB6 invert_step=-1 step_pulse_ticks=40 config_stepper oid=1 step_pin=PB2 dir_pin=PB6 invert_step=-1 step_pulse_ticks=52
config_stepper oid=2 step_pin=PB3 dir_pin=PB7 invert_step=-1 step_pulse_ticks=40 config_stepper oid=2 step_pin=PB3 dir_pin=PB7 invert_step=-1 step_pulse_ticks=52
finalize_config crc=0 finalize_config crc=0
``` ```
The test was last run on commit `0d27195f` with gcc version The test was last run on commit `554ae78d` with gcc version
`arm-none-eabi-gcc (Fedora 14.1.0-1.fc40) 14.1.0`. `arm-none-eabi-gcc (Fedora 14.1.0-1.fc40) 14.1.0`.
| stm32h723 | ticks | | stm32h723 | ticks |
| -------------------- | ----- | | -------------------- | ----- |
| 1 stepper | 60 | | 1 stepper | 70 |
| 3 stepper | 183 | | 3 stepper | 181 |
### STM32G0B1 step rate benchmark ### STM32G0B1 step rate benchmark

View File

@ -195,7 +195,7 @@ represent total number of steps per second on the micro-controller.
| RP2040 | 4000K | 2571K | | RP2040 | 4000K | 2571K |
| RP2350 | 4167K | 2663K | | RP2350 | 4167K | 2663K |
| SAME70 | 6667K | 4737K | | SAME70 | 6667K | 4737K |
| STM32H723 | 6667K | 6557K | | STM32H723 | 7429K | 8619K |
If unsure of the micro-controller on a particular board, find the If unsure of the micro-controller on a particular board, find the
appropriate [config file](../config/), and look for the appropriate [config file](../config/), and look for the