Kevin O'Connor 077a56c2ca mcu: Default the restart method to 'command' on non-serial ports ...

If the mcu supports command restarts and it does not appear to use a
real serial port, then default the restart method to 'command'.  This
is a better default on boards with native USB support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-01-29 10:25:25 -05:00

..

anet-a8-2017.cfg

config: Adopt Anet A8 cfg, Anet v1.0-1.5 Boards

2018-01-07 22:22:08 -05:00

anycubic-i3-mega-2017.cfg

config: Update anycubic-i3-mega-2017.cfg with stepstick fan

2018-01-22 11:28:20 -05:00

avrsim.cfg

config: Update avrsim.cfg to use unique pins

2018-01-12 16:44:21 -05:00

creality-cr10-2017.cfg

config: Create creality-cr10

2018-01-08 18:48:03 -05:00

creality-cr10s-2017.cfg

Add a CR-10S configuration file.

2018-01-16 18:29:45 -05:00

example-corexy.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

example-delta.cfg

delta_calibrate: Add initial support for a DELTA_CALIBRATE command

2018-01-28 12:19:26 -05:00

example-extras.cfg

homing_override: Allow moves prior to homing an axis

2018-01-28 12:19:26 -05:00

example.cfg

mcu: Default the restart method to 'command' on non-serial ports

2018-01-29 10:25:25 -05:00

generic-cramps.cfg

config: Warn Beaglebone PRU users that pinmux settings are not updated

2017-10-25 11:01:36 -04:00

generic-melzi.cfg

config: Note the need to flash a bootloader on the Melzi

2018-01-05 10:23:58 -05:00

generic-mini-rambo.cfg

config: Add example generic-mini-rambo.cfg config file

2018-01-17 01:00:20 -05:00

generic-printrboard.cfg

config: Add a generic-printrboard.cfg file

2017-10-30 10:56:08 -04:00

generic-rambo.cfg

config: List E1 micro-step pins in order in generic-rambo.cfg

2017-11-08 11:14:37 -05:00

generic-ramps.cfg

stepper: Use a sane default for homing_positive_dir

2017-07-24 14:31:46 -04:00

generic-replicape.cfg

replicape: Move the replicape code from chipmisc.py to extras directory

2018-01-28 12:19:26 -05:00

lulzbot-taz6-2017.cfg

config: Update TAZ6 defaults for hotend

2018-01-04 10:58:47 -05:00

makergear-m2-2012.cfg

chipmisc: Add support for configuring ad5206 digipots

2017-08-26 18:27:21 -04:00

seemecnc-rostock-max-v2-2015.cfg

config: Add SeeMeCNC Rostock Max V2 Delta Printer Config

2018-01-28 20:31:15 -05:00

tronxy-x5s-2017.cfg

config: Add tronxy x5s config

2018-01-16 22:20:55 -05:00

wanhao-duplicator-i3-plus-2017.cfg

config: Update wanhao-duplicator-i3-plus-2017.cfg heater settings

2018-01-21 18:52:14 -05:00