From d444289111c041c0111197b420aef2391dd43278 Mon Sep 17 00:00:00 2001 From: JamesH1978 <87171443+JamesH1978@users.noreply.github.com> Date: Thu, 8 May 2025 16:35:38 +0100 Subject: [PATCH] config: Update CR6-SE 2020 config with board revision (#6923) It has been noted that there are 3 possible boards with 2 possible configs, which we have both of, but this one does not state that it is for the 4.5.2 early kickstarter version. Which was causing some confusion. Signed-off-by: James Hartley --- config/printer-creality-cr6se-2020.cfg | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/config/printer-creality-cr6se-2020.cfg b/config/printer-creality-cr6se-2020.cfg index 2929a9ac..445c2ef0 100644 --- a/config/printer-creality-cr6se-2020.cfg +++ b/config/printer-creality-cr6se-2020.cfg @@ -1,4 +1,5 @@ -# This file contains pin mappings for the stock 2020 Creality CR6-SE. +# This file contains pin mappings for the stock 2020 Creality CR6-SE +# with the early 4.5.2 board only. # To use this config, during "make menuconfig" select the STM32F103 # with a "28KiB bootloader" and serial (on USART1 PA10/PA9) # communication.