andreil/klipper
1
0
Fork 0
mirror of https://github.com/andreili/klipper.git synced 2025-08-23 19:34:06 +02:00
Code Issues Packages Projects Releases Wiki Activity

docs: BED_MESH_CALIBRATE makes a mesh that is immediately available. (#6919)

Browse Source 
The docs aren't particularly clear that if you generate a mesh in our start g-code, you can just use it without additional commands. This is causing issues with support on r/klippers

Signed-off-by: Rowland Straylight <rowlandstraylight@gmail.com>
This commit is contained in:
Rowland 2025-05-14 18:53:10 +01:00 committed by GitHub
parent ed36041b67
commit 82f540bb73
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
2 changed files with 9 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
docs/Bed_Mesh.md
View File

@ -497,7 +497,8 @@ _Default Adaptive Margin: 0_
Initiates the probing procedure for Bed Mesh Calibration.
The mesh will be saved into a profile specified by the `PROFILE` parameter,
The mesh will be immediately ready to use when the command completes and saved
into a profile specified by the `PROFILE` parameter,
or `default` if unspecified. The `METHOD` parameter takes one of the following
values:
@ -561,6 +562,10 @@ load the `default` profile it is recommended to add
`BED_MESH_PROFILE LOAD=default` to either their `START_PRINT` macro or their
slicer's "Start G-Code" configuration, whichever is applicable.
Note that this is not required if a new mesh is generated with
`BED_MESH_CALIBRATE` in the `START_PRINT` macro or the slicer's "Start G-Code"
and may produce unexpected results, especially with adaptive meshing.
Alternatively the old behavior of loading a profile at startup can be
restored with a `[delayed_gcode]`:

4
docs/G-Codes.md
View File

@ -174,8 +174,10 @@ The following commands are available when the
[ADAPTIVE_MARGIN=<value>]`: This command probes the bed using generated points
specified by the parameters in the config. After probing, a mesh is generated
and z-movement is adjusted according to the mesh.
The mesh is immediately active after successful completion of `BED_MESH_CALIBRATE`.
The mesh will be saved into a profile specified by the `PROFILE` parameter,
or `default` if unspecified.
or `default` if unspecified. If ADAPTIVE=1 is specified then the profile
name will begin with `adaptive-` and should not be saved for reuse.
See the PROBE command for details on the optional probe parameters. If
METHOD=manual is specified then the manual probing tool is activated - see the
MANUAL_PROBE command above for details on the additional commands available