mirror of
https://github.com/andreili/katapult.git
synced 2025-08-24 03:44:06 +02:00
c0014efc4a
Synchronize with the latest Klipper code. This pulls in the latest lib/ files (needed to use the pico-sdk v2.0.0 version). It updates to latest can2040 code (needed for pico-sdk v2.0.0 support). It implements USB double buffering (as is now done in Klipper). It adds in support for additional UART pins (as is now done in Klipper). It adds support for rp2350 chips. This replaces the execute in ram code previously implemented in Katapult with the execute in ram code that is now standard in Klipper. The CONFIG_RP2040_ADD_BOOT_SIGNATURE kconfig symbol was removed and the build now always produces a katapult.withclear.uf2 file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
83 lines
2.6 KiB
C
83 lines
2.6 KiB
C
// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
|
|
|
|
/**
|
|
* Copyright (c) 2024 Raspberry Pi Ltd.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
#ifndef _HARDWARE_STRUCTS_PLL_H
|
|
#define _HARDWARE_STRUCTS_PLL_H
|
|
|
|
/**
|
|
* \file rp2350/pll.h
|
|
*/
|
|
|
|
#include "hardware/address_mapped.h"
|
|
#include "hardware/regs/pll.h"
|
|
|
|
// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_pll
|
|
//
|
|
// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
|
|
// _REG_(x) will link to the corresponding register in hardware/regs/pll.h.
|
|
//
|
|
// Bit-field descriptions are of the form:
|
|
// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
|
|
|
|
/// \tag::pll_hw[]
|
|
typedef struct {
|
|
_REG_(PLL_CS_OFFSET) // PLL_CS
|
|
// Control and Status
|
|
// 0x80000000 [31] LOCK (0) PLL is locked
|
|
// 0x40000000 [30] LOCK_N (0) PLL is not locked +
|
|
// 0x00000100 [8] BYPASS (0) Passes the reference clock to the output instead of the...
|
|
// 0x0000003f [5:0] REFDIV (0x01) Divides the PLL input reference clock
|
|
io_rw_32 cs;
|
|
|
|
_REG_(PLL_PWR_OFFSET) // PLL_PWR
|
|
// Controls the PLL power modes
|
|
// 0x00000020 [5] VCOPD (1) PLL VCO powerdown +
|
|
// 0x00000008 [3] POSTDIVPD (1) PLL post divider powerdown +
|
|
// 0x00000004 [2] DSMPD (1) PLL DSM powerdown +
|
|
// 0x00000001 [0] PD (1) PLL powerdown +
|
|
io_rw_32 pwr;
|
|
|
|
_REG_(PLL_FBDIV_INT_OFFSET) // PLL_FBDIV_INT
|
|
// Feedback divisor
|
|
// 0x00000fff [11:0] FBDIV_INT (0x000) see ctrl reg description for constraints
|
|
io_rw_32 fbdiv_int;
|
|
|
|
_REG_(PLL_PRIM_OFFSET) // PLL_PRIM
|
|
// Controls the PLL post dividers for the primary output
|
|
// 0x00070000 [18:16] POSTDIV1 (0x7) divide by 1-7
|
|
// 0x00007000 [14:12] POSTDIV2 (0x7) divide by 1-7
|
|
io_rw_32 prim;
|
|
|
|
_REG_(PLL_INTR_OFFSET) // PLL_INTR
|
|
// Raw Interrupts
|
|
// 0x00000001 [0] LOCK_N_STICKY (0)
|
|
io_rw_32 intr;
|
|
|
|
_REG_(PLL_INTE_OFFSET) // PLL_INTE
|
|
// Interrupt Enable
|
|
// 0x00000001 [0] LOCK_N_STICKY (0)
|
|
io_rw_32 inte;
|
|
|
|
_REG_(PLL_INTF_OFFSET) // PLL_INTF
|
|
// Interrupt Force
|
|
// 0x00000001 [0] LOCK_N_STICKY (0)
|
|
io_rw_32 intf;
|
|
|
|
_REG_(PLL_INTS_OFFSET) // PLL_INTS
|
|
// Interrupt status after masking & forcing
|
|
// 0x00000001 [0] LOCK_N_STICKY (0)
|
|
io_ro_32 ints;
|
|
} pll_hw_t;
|
|
/// \end::pll_hw[]
|
|
|
|
#define pll_sys_hw ((pll_hw_t *)PLL_SYS_BASE)
|
|
#define pll_usb_hw ((pll_hw_t *)PLL_USB_BASE)
|
|
static_assert(sizeof (pll_hw_t) == 0x0020, "");
|
|
|
|
#endif // _HARDWARE_STRUCTS_PLL_H
|
|
|