andreil/SBC_builder
1
0
Fork 0
mirror of https://github.com/andreili/SBC_builder.git synced 2025-08-23 19:04:06 +02:00
Code Issues Packages Projects Releases Wiki Activity
SBC_builder/tmp/rk3566-bigtreetech-cb2.dtsi
andreili 1383d18ecc Add one wire support.
2025-08-17 18:28:17 +02:00

989 lines
20 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/leds/common.h>
#include "rk3566.dtsi"
/ {
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
ext_cam_clk: clock-25000000-cam {
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "ext_cam_clk";
#clock-cells = <0>;
};
can_mcp2515_osc: clock-8000000-mcp2515 {
compatible = "fixed-clock";
clock-frequency = <8000000>;
#clock-cells = <0>;
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds: leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
pinctrl-names = "default";
pinctrl-0 =<&blue_led>;
};
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_HEARTBEAT;
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 =<&heartbeat_led>;
};
};
fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
cooling-levels = <0 50 100 150 200 255>;
pwms = <&pwm7 0 50000 0>;
};
rk809-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "Analog RK809";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk809>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk809 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
post-power-on-delay-ms = <200>;
reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>;
};
vbus: regulator-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc12v_dcin: regulator-vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_pcie: regulator-vcc3v3-pcie {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
enable-active-high;
gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_drv>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc12v_dcin>;
};
vcc3v3_sys: regulator-vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vbus>;
};
vcc5v0_host: regulator-vcc5v0-host {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host3";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_otg: regulator-vcc5v0-otg {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_otg_en>;
regulator-name = "vcc5v0_otg3";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_sys: regulator-vcc5v0-sys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vbus>;
};
vcc5v0_usb: regulator-vcc5v0-usb {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vbus>;
};
vcc5v0_usb2b: regulator-vcc5v0-usb2b {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb2b_en>;
regulator-name = "vcc5v0_usb2b";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb2t: regulator-vcc5v0-usb2t {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb2t_en>;
regulator-name = "vcc5v0_usb2t";
regulator-always-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc_5v: regulator-vcc-5v {
compatible = "regulator-fixed";
regulator-name = "vcc_5v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc_sd: regulator-vcc-sd {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "vcc_sd";
vin-supply = <&vcc3v3_sys>;
};
onewire: onewire {
compatible = "w1-gpio";
gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&gpio_w1>;
status = "okay";
};
};
&pinctrl {
gpio-w1 {
gpio_w1:gpio-w1 {
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&tsadc {
status = "okay";
};
&dsi_dphy1 {
status = "disabled";
};
&dsi1 {
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
dsi1_panel: panel@0 {
compatible = "btt-pitft";
reg = <0x0>;
status = "disabled";
vddc-supply = <&bl_dsi>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
panel_in: endpoint {
remote-endpoint = <&mipi_dsi_out>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
dsi1_in: port@0 {
reg = <0>;
dsi1_in_vp1: endpoint {
remote-endpoint = <&vp1_out_dsi1>;
};
};
dsi1_out: port@1 {
reg = <1>;
mipi_dsi_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
assigned-clock-rates = <0>, <125000000>;
clock_in_out = "input";
phy-handle = <&rgmii_phy0>;
phy-mode = "rgmii-id";
pinctrl-names = "default";
pinctrl-0 = <&gmac1m0_miim
&gmac1m0_tx_bus2
&gmac1m0_rx_bus2
&gmac1m0_rgmii_clk
&gmac1m0_clkinout
&gmac1m0_rgmii_bus>;
tx_delay = <0x19>;
rx_delay = <0x05>;
status = "okay";
};
&mdio1 {
rgmii_phy0: phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reset-delay-us = <20000>;
reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
reset-post-delay-us = <100000>;
reg = <0x0>;
};
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
status = "disabled";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-initial-mode = <1>;
regulator-ramp-delay = <2300>;
regulator-boot-on;
regulator-always-on;
vin-supply = <&vcc5v0_sys>;
fcs,suspend-voltage-selector = <1>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
#clock-cells = <1>;
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
pinctrl-names = "default", "pmic-sleep",
"pmic-power-off", "pmic-reset";
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
#sound-dai-cells = <0>;
system-power-controller;
wakeup-source;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
regulators {
vdd_logic: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_npu";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_image";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_3v3";
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc3v3_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
codec {
rockchip,mic-in-differential;
};
};
};
&i2c2 {
status = "okay";
pinctrl-names = "default";
clock-frequency = <100000>;
pinctrl-0 = <&i2c2m1_xfer>;
avdd-1v8-supply = <&vcca1v8_image>;
avdd-0v9-supply = <&vdda0v9_image>;
power-domains = <&power RK3568_PD_VI>;
#address-cells = <1>;
#size-cells = <0>;
#size-cells = <0>;
bl_dsi: regulator@45 {
compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
reg = <0x45>;
status = "disabled";
};
tp_dsi: touchscreen@38 {
compatible = "edt,edt-ft5306";
reg = <0x38>;
status = "disabled";
vcc-supply = <&vcc3v3_sys>;
iovcc-supply = <&vcc_3v3>;
touchscreen-size-x = <800>;
touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
};
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
can_mcp2515: can@0 {
compatible = "microchip,mcp2515";
reg = <0x00>;
clocks = <&can_mcp2515_osc>;
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mcp2515_int_pin>;
spi-max-frequency = <10000000>;
vdd-supply = <&vcc3v3_sys>;
xceiver-supply = <&vcc3v3_sys>;
};
};
&spi3 {
pinctrl-names = "default";
pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>;
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_h>;
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
};
&pinctrl {
bt {
bt_enable: bt-enable-h {
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
};
bt_host_wake: bt-host-wake-l {
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
bt_wake: bt-wake-l {
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_drv: pcie-drv {
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset_h: pcie-reset-h {
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic-int {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake: wifi-host-wake-l {
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_otg_en: vcc5v0-otg-en {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb2t_en: vcc5v0-usb2t-en {
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb2b_en: vcc5v0-usb2b-en {
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
work-led {
heartbeat_led: led-heartbeat {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
blue_led: led-blue {
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
mcp2515 {
mcp2515_int_pin: mcp2515-int-pin {
rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vcc_3v3>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_3v3>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0m1_pins>;
};
&pwm12 {
pinctrl-names = "default";
pinctrl-0 = <&pwm12m1_pins>;
};
&pwm13 {
pinctrl-names = "default";
pinctrl-0 = <&pwm13m1_pins>;
};
&pwm14 {
pinctrl-names = "default";
pinctrl-0 = <&pwm14m1_pins>;
};
&pwm15 {
pinctrl-names = "default";
pinctrl-0 = <&pwm15m1_pins>;
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
status = "okay";
};
&sdmmc0 {
max-frequency = <150000000>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc1 {
/* WiFi & BT combo module AMPAK AP6256 */
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
disable-wp;
keep-power-in-suspend;
max-frequency = <150000000>;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
rockchip,default-sample-phase = <90>;
status = "okay";
sdio-wifi@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake>;
brcm,drive-strength = <10>;
};
};
&sfc {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
};
&uart1 {
dma-names = "tx","rx";
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm4345c5";
clocks = <&rk809 1>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
vbat-supply = <&vcc3v3_sys>;
vddio-supply = <&vcca1v8_pmu>;
};
};
&uart2 {
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&uart5m1_xfer>;
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7m2_xfer>;
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb2t>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb2b>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
dr_mode = "host";
extcon = <&usb2phy0>;
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
vop-supply = <&vdd_logic>;
};
&scmi_clk {
rockchip,clk-init = <1104000000>;
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};
&vp1 {
vp1_out_dsi1: endpoint@ROCKCHIP_VOP2_EP_MIPI1 {
reg = <ROCKCHIP_VOP2_EP_MIPI1>;
remote-endpoint = <&dsi1_in_vp1>;
};
};
Reference in New Issue View Git Blame Copy Permalink