SBC_builder/patch/kernel/sunxi-6.14/patches.armbian/arm64-dts-sun50i-h313-x96q-lpddr3.patch
2025-06-01 01:05:27 +02:00

442 lines
9.9 KiB
Diff

From 2729354bb6f8fed58045c8b26650402e98bdc77f Mon Sep 17 00:00:00 2001
From: The-going <48602507+The-going@users.noreply.github.com>
Date: Sat, 21 Sep 2024 11:28:33 +0300
Subject: arm64: dts: sun50i-h313-x96q-lpddr3
Add support X96Q TV Box LPDDR3 H313
Author: sicXnull <notifications@github.com>
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h313-cpu-opp.dtsi | 92 ++++++
.../dts/allwinner/sun50i-h313-x96q-lpddr3.dts | 305 ++++++++++++++++++
3 files changed, 398 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-cpu-opp.dtsi
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 95d2886defc8..67f738f9b513 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-inovato-quadra.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q-lpddr3.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-sd.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-emmc.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h313-cpu-opp.dtsi
new file mode 100644
index 000000000000..0ad85cf1b393
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-cpu-opp.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
+
+/*
+ X96-q DDR3 vendor Android DT:
+ 480000000 900mV
+ 600000000 900mV
+ 792000000 900mV
+ 1008000000 920mV
+ 1200000000 980mV
+ 1344000000 1120mV
+ 1416000000 1140mV
+ 1512000000 1160mV
+*/
+
+/ {
+ cpu_opp_table: opp-table-cpu {
+ compatible = "allwinner,sun50i-h616-operating-points";
+ nvmem-cells = <&cpu_speed_grade>;
+ opp-shared;
+
+ opp-480000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <480000000>;
+
+ opp-microvolt-speed0 = <900000 900000 1100000>;
+ opp-microvolt-speed1 = <900000 900000 1100000>;
+ opp-microvolt-speed2 = <900000 900000 1100000>;
+ };
+
+ opp-600000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <600000000>;
+
+ opp-microvolt-speed0 = <900000 900000 1100000>;
+ opp-microvolt-speed1 = <900000 900000 1100000>;
+ opp-microvolt-speed2 = <900000 900000 1100000>;
+ };
+
+ opp-792000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <792000000>;
+
+ opp-microvolt-speed0 = <900000 900000 1100000>;
+ opp-microvolt-speed1 = <900000 900000 1100000>;
+ opp-microvolt-speed2 = <900000 900000 1100000>;
+ };
+
+ opp-1008000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1008000000>;
+
+ opp-microvolt-speed0 = <920000 920000 1100000>;
+ opp-microvolt-speed1 = <920000 920000 1100000>;
+ opp-microvolt-speed2 = <920000 920000 1100000>;
+ };
+
+ opp-1200000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1200000000>;
+
+ opp-microvolt-speed0 = <980000 980000 1100000>;
+ opp-microvolt-speed1 = <980000 980000 1100000>;
+ opp-microvolt-speed2 = <980000 980000 1100000>;
+ };
+
+ opp-1512000000 {
+ clock-latency-ns = <244144>; /* 8 32k periods */
+ opp-hz = /bits/ 64 <1512000000>;
+
+ opp-microvolt-speed0 = <1100000 1100000 1100000>;
+ opp-microvolt-speed1 = <1100000 1100000 1100000>;
+ opp-microvolt-speed2 = <1100000 1100000 1100000>;
+ };
+ };
+};
+
+&cpu0 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+ operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts
new file mode 100644
index 000000000000..4b1faad0e88c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Author: piotr.oniszczuk@gmail.com
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h313-cpu-opp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "X96Q TV-Box LPDDR3";
+ compatible = "hechuang,x96-q", "allwinner,sun50i-h616";
+
+ aliases {
+ mmc0 = &mmc0;
+ mmc2 = &mmc2;
+ ethernet0 = &emac1;
+ ethernet1 = &wlan;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "d";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-red {
+ function = LED_FUNCTION_DISK_ACTIVITY;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ reg_vcc5v: vcc5v {
+ /* board wide 5V supply directly from the USB-C socket */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_vcc5v>;
+ enable-active-high;
+ /* gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; PC16 */
+ status = "okay";
+ };
+
+ reg_vcc_wifi: reg_vcc_wifi {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 WL_REG_ON */
+ regulator-always-on;
+ enable-active-high;
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "osc32k-out";
+ reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <&reg_aldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&gpu {
+ mali-supply = <&reg_dcdc1>;
+ status = "okay";
+};
+
+&emac1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins>;
+ phy-mode = "rmii";
+ phy-handle = <&rmii_phy>;
+ phy-supply = <&reg_aldo1>;
+ allwinner,rx-delay-ps = <3100>;
+ allwinner,tx-delay-ps = <700>;
+ status = "okay";
+};
+
+&mdio1 {
+ rmii_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_dldo1>;
+ broken-cd;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <&reg_dldo1>;
+ vqmmc-supply = <&reg_vcc_wifi>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ wlan: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 15 IRQ_TYPE_EDGE_RISING>; /* PG15 WL_HOSTWAKE*/
+ interrupt-names = "host-wake";
+ local-mac-address = [dc 44 6d c0 ff 02];
+ };
+};
+
+&mmc2 {
+ vmmc-supply = <&reg_dldo1>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp313a: pmic@36 {
+ compatible = "x-powers,axp313a";
+ reg = <0x36>;
+ wakeup-source;
+ vin1-supply = <&reg_vcc5v>;
+ vin2-supply = <&reg_vcc5v>;
+ vin3-supply = <&reg_vcc5v>;
+
+ regulators {
+ reg_dcdc1: dcdc1 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdc2: dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1160000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdc3: dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd-dram";
+ };
+
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc1v8";
+ };
+
+ reg_dldo1: dldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3";
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo1>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ status = "okay";
+};
+
+&ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
+&codec {
+ allwinner,audio-routing =
+ "Line Out", "LINEOUT";
+ status = "okay";
+};
+
+&ahub_dam_plat {
+ status = "okay";
+};
+
+&ahub1_plat {
+ status = "okay";
+};
+
+&ahub1_mach {
+ status = "okay";
+};
+
--
2.35.3