From ff794822d56721795fec59dea66164cc19ba792c Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sun, 29 Sep 2024 22:04:43 +1300 Subject: drm: sun4i: de3: add YUV support to the TCON Account for U/V channel subsampling by reducing the dot clock and resolution with a divider in the DE3 timing controller if a YUV format is selected. Signed-off-by: Jernej Skrabec Signed-off-by: Ryan Walklin --- drivers/gpu/drm/sun4i/sun4i_tcon.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 3675c87461e9..af67bf2e6e09 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -649,14 +649,26 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { - unsigned int bp, hsync, vsync, vtotal; + unsigned int bp, hsync, vsync, vtotal, div; + struct sun4i_crtc *scrtc = tcon->crtc; + struct sunxi_engine *engine = scrtc->engine; u8 clk_delay; u32 val; WARN_ON(!tcon->quirks->has_channel_1); + switch (engine->format) { + case MEDIA_BUS_FMT_UYYVYY8_0_5X24: + case MEDIA_BUS_FMT_UYYVYY10_0_5X30: + div = 2; + break; + default: + div = 1; + break; + } + /* Configure the dot clock */ - clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000); + clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000 / div); /* Adjust clock delay */ clk_delay = sun4i_tcon_get_clk_delay(mode, 1); @@ -675,17 +687,17 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, /* Set the input resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC0_REG, - SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay) | + SUN4I_TCON1_BASIC0_X(mode->crtc_hdisplay / div) | SUN4I_TCON1_BASIC0_Y(mode->crtc_vdisplay)); /* Set the upscaling resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC1_REG, - SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay) | + SUN4I_TCON1_BASIC1_X(mode->crtc_hdisplay / div) | SUN4I_TCON1_BASIC1_Y(mode->crtc_vdisplay)); /* Set the output resolution */ regmap_write(tcon->regs, SUN4I_TCON1_BASIC2_REG, - SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay) | + SUN4I_TCON1_BASIC2_X(mode->crtc_hdisplay / div) | SUN4I_TCON1_BASIC2_Y(mode->crtc_vdisplay)); /* Set horizontal display timings */ @@ -693,8 +705,8 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, DRM_DEBUG_DRIVER("Setting horizontal total %d, backporch %d\n", mode->htotal, bp); regmap_write(tcon->regs, SUN4I_TCON1_BASIC3_REG, - SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal) | - SUN4I_TCON1_BASIC3_H_BACKPORCH(bp)); + SUN4I_TCON1_BASIC3_H_TOTAL(mode->crtc_htotal / div) | + SUN4I_TCON1_BASIC3_H_BACKPORCH(bp / div)); bp = mode->crtc_vtotal - mode->crtc_vsync_start; DRM_DEBUG_DRIVER("Setting vertical total %d, backporch %d\n", -- 2.35.3