From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Sat, 16 Nov 2024 03:19:43 +0200 Subject: dt-bindings: display: vop2: Add optional PLL clock properties On RK3588, HDMI PHY PLL can be used as an alternative and more accurate pixel clock source for VOP2 video ports 0, 1 and 2. Document the optional PLL clock properties corresponding to the two HDMI PHYs available on the SoC. Signed-off-by: Cristian Ciocaltea --- Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml index 111111111111..222222222222 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml @@ -53,6 +53,8 @@ properties: - description: Pixel clock for video port 2. - description: Pixel clock for video port 3. - description: Peripheral(vop grf/dsi) clock. + - description: Alternative pixel clock provided by HDMI0 PHY PLL. + - description: Alternative pixel clock provided by HDMI1 PHY PLL. clock-names: minItems: 5 @@ -64,6 +66,8 @@ properties: - const: dclk_vp2 - const: dclk_vp3 - const: pclk_vop + - const: pll_hdmiphy0 + - const: pll_hdmiphy1 rockchip,grf: $ref: /schemas/types.yaml#/definitions/phandle -- Armbian From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 12 Nov 2024 02:27:35 +0200 Subject: drm/rockchip: vop2: Drop unnecessary if_pixclk_rate computation The if_pixclk_rate variable is not being used outside of the if-block in rk3588_calc_cru_cfg(), hence move the superfluous assignment from the first branch to the inner comment-block. Signed-off-by: Cristian Ciocaltea --- drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index 111111111111..222222222222 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c @@ -1905,8 +1905,8 @@ static unsigned long rk3588_calc_cru_cfg(struct vop2_video_port *vp, int id, K = 2; } - if_pixclk_rate = (dclk_core_rate << 1) / K; /* + * if_pixclk_rate = (dclk_core_rate << 1) / K; * if_dclk_rate = dclk_core_rate / K; * *if_pixclk_div = dclk_rate / if_pixclk_rate; * *if_dclk_div = dclk_rate / if_dclk_rate; -- Armbian From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Fri, 3 Nov 2023 19:58:02 +0200 Subject: drm/rockchip: vop2: Improve display modes handling on RK3588 HDMI0 The RK3588 specific implementation is currently quite limited in terms of handling the full range of display modes supported by the connected screens, e.g. 2560x1440@75Hz, 2048x1152@60Hz, 1024x768@60Hz are just a few of them. Additionally, it doesn't cope well with non-integer refresh rates like 59.94, 29.97, 23.98, etc. Make use of HDMI0 PHY PLL as a more accurate DCLK source to handle all display modes up to 4K@60Hz. Signed-off-by: Cristian Ciocaltea --- drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 34 ++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index 111111111111..222222222222 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c @@ -159,6 +159,7 @@ struct vop2_video_port { struct drm_crtc crtc; struct vop2 *vop2; struct clk *dclk; + struct clk *dclk_src; unsigned int id; const struct vop2_video_port_data *data; @@ -214,6 +215,7 @@ struct vop2 { struct clk *hclk; struct clk *aclk; struct clk *pclk; + struct clk *pll_hdmiphy0; /* optional internal rgb encoder */ struct rockchip_rgb *rgb; @@ -222,6 +224,8 @@ struct vop2 { struct vop2_win win[]; }; +#define VOP2_MAX_DCLK_RATE 600000000 + #define vop2_output_if_is_hdmi(x) ((x) == ROCKCHIP_VOP2_EP_HDMI0 || \ (x) == ROCKCHIP_VOP2_EP_HDMI1) @@ -1155,6 +1159,9 @@ static void vop2_crtc_atomic_disable(struct drm_crtc *crtc, vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID); + if (vp->dclk_src) + clk_set_parent(vp->dclk, vp->dclk_src); + clk_disable_unprepare(vp->dclk); vop2->enable_count--; @@ -2259,6 +2266,27 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc, vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0); + /* + * Switch to HDMI PHY PLL as DCLK source for display modes up + * to 4K@60Hz, if available, otherwise keep using the system CRU. + */ + if (vop2->pll_hdmiphy0 && clock <= VOP2_MAX_DCLK_RATE) { + drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) { + struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder); + + if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI0) { + if (!vp->dclk_src) + vp->dclk_src = clk_get_parent(vp->dclk); + + ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy0); + if (ret < 0) + drm_warn(vop2->drm, + "Could not switch to HDMI0 PHY PLL: %d\n", ret); + break; + } + } + } + clk_set_rate(vp->dclk, clock); vop2_post_config(crtc); @@ -3699,6 +3727,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data) return PTR_ERR(vop2->pclk); } + vop2->pll_hdmiphy0 = devm_clk_get_optional(vop2->dev, "pll_hdmiphy0"); + if (IS_ERR(vop2->pll_hdmiphy0)) { + drm_err(vop2->drm, "failed to get pll_hdmiphy0\n"); + return PTR_ERR(vop2->pll_hdmiphy0); + } + vop2->irq = platform_get_irq(pdev, 0); if (vop2->irq < 0) { drm_err(vop2->drm, "cannot find irq for vop2\n"); -- Armbian From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 16 Jan 2024 03:13:38 +0200 Subject: arm64: dts: rockchip: Enable HDMI0 PHY clk provider on RK3588 Since commit c4b09c562086 ("phy: phy-rockchip-samsung-hdptx: Add clock provider support"), the HDMI PHY PLL can be used as an alternative and more accurate pixel clock source for VOP2 to improve display modes handling on RK3588 SoC. Add the missing #clock-cells property to allow using the clock provider functionality of HDMI0 PHY. Signed-off-by: Cristian Ciocaltea --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 111111111111..222222222222 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -2812,6 +2812,7 @@ hdptxphy_hdmi0: phy@fed60000 { reg = <0x0 0xfed60000 0x0 0x2000>; clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>, <&cru PCLK_HDPTX0>; clock-names = "ref", "apb"; + #clock-cells = <0>; #phy-cells = <0>; resets = <&cru SRST_HDPTX0>, <&cru SRST_P_HDPTX0>, <&cru SRST_HDPTX0_INIT>, <&cru SRST_HDPTX0_CMN>, -- Armbian From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Sat, 16 Nov 2024 04:33:46 +0200 Subject: arm64: dts: rockchip: Add HDMI0 PHY PLL clock source to VOP2 on RK3588 VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and more accurate pixel clock source to improve handling of display modes up to 4K@60Hz on video ports 0, 1 and 2. For now only HDMI0 output is supported, hence add the related PLL clock. Signed-off-by: Cristian Ciocaltea --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 111111111111..222222222222 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1261,14 +1261,16 @@ vop: vop@fdd90000 { <&cru DCLK_VOP1>, <&cru DCLK_VOP2>, <&cru DCLK_VOP3>, - <&cru PCLK_VOP_ROOT>; + <&cru PCLK_VOP_ROOT>, + <&hdptxphy_hdmi0>; clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2", "dclk_vp3", - "pclk_vop"; + "pclk_vop", + "pll_hdmiphy0"; iommus = <&vop_mmu>; power-domains = <&power RK3588_PD_VOP>; rockchip,grf = <&sys_grf>; -- Armbian